2. Select "COM1" in the "Port" drop-down list.
3. Click the "Work Mode" drop-down list box and select "RealCom Mode".
4. Click the "Session Number" drop-down list box and select "1".
5. Other parameters remain the default, click "Submit".
Step 4 Run "VSP Manager" software, configure the virtual serial port COM2.
1. Run the "VSP Manager" software, click "Add Device" in the left navigation bar, and
then click "Add Device". Enter the IP address and subnet mask of the serial server
and click "OK".
2. Right click "192.168.1.250" and select "Quick Add Ports". After creating the virtual
serial port COM2, click "OK".
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
User Manual
61