3onedata NP318T-8DI User Manual page 89

UDP (User Datagram Protocol), is a connectionless protocol. So after the successful
creation of UdpClient connection, you do not need to click "Start".
Setp 5 Simultaneous operation of the "DebugTool" and "ComTest3One" software, test the
serial server (UDP Client) and the host PC (UDP server) to communicate with each
other.
1. Install and run the "ComTest3One" software, click "Begin" menu "New Windows".
2. Add serial port "COM1" window, configure the COM, BaudRate, parity, DataBits
and other parameters and WEB interface "COM settings" consistent.
3. Open the "COM1" serial port signal, for example, enter the serial information
"0123456789AB", and click "Manual Send".
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
User Manual
82