Login The Web Configuration Interface - 3onedata NP318T-8DI User Manual

1.3 Login the WEB Configuration Interface

Operation steps
Log in to the WEB configuration interface as follows:
Step 1 Run the computer browser.
Step 2 Enter the address of the serial server "http://192.168.1.254" in the address bar of the
browser.
Step 3 Click the Enter key.
Step 4 Pop-up dialog box as shown below, enter the user name and password in the login
window.
Note:
The default username and password for the serial server are "admin", which is strictly

case-sensitive when typing.
The default user password is with administrator privileges.

WebServer will provide three opportunities to enter the user name and password. If you

enter the error 3 times in succession, the browser will display "Access denied" to deny
access to the information. Please refresh the page and try again.
Step 5 Click "OK".
Step 6 End.
After successful login, you can configure the relevant parameters and information of
the WEB interface as needed.
Note:
After logging in to the device, you can modify the IP address of the serial server for ease of
use.
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
User Manual
3