3onedata NP318T-8DI User Manual page 75

1. Install and run the "ComTest3One" software, click "Begin" menu "New Windows".
2. Add serial port "COM1" window, configure the COM, BaudRate, parity, DataBits
and other parameters and WEB interface "COM settings" consistent.
3. Open the "COM1" serial port signal, for example, enter the serial information
"0123456789AB", and click "Manual Send".
4. Run the "DebugTool" software, in the TcpClient option box to view the host PC to
receive the serial information. Similarly, the host PC can also send information to
the serial device.
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
User Manual
68