1. Log in to the Web configuration interface and select "Serial Server> COM Mode
Settings".
2. Select "COM1" in the "Port" drop-down list.
3. Click the "Work Mode" drop-down list box and select "Udp Server Mode".
4. Click the "Session Number" drop-down list box and select "1".
5. Enter "30000" in the "Listen port" text box.
6. Other parameters remain the default, click "submit".
Step 4 Run the "DebugTool" software, for the host to create UDP client.
1. To install and run "DebugTool" Software, click "Create Connection" drop-down list
box and choose "Create Network Debugging>UDPClient".
2. In the "Local IP" drop-down list box, select the IP address "192.168.1.61" of the
host PC (that is, the Udp client).
3. Enter the port number "31000" for the host PC (that is, the Udp client) in the "Local
Port" text box.
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
User Manual
76