Table of Contents
Advertisement
Interface Element
Dest Port
Apply to all Port
Pair Slave mode automatically changes according to the communication parameters of
Pair Master mode device. During communication, it needs to configure the same
parameters of the sending interface at both ends to communicate normally.
Pair mode requires two serial devices. The IP address of the pair slave device as the
destination address of the pair master mode device. The listening port of the pair slave
mode device serves as the destination port for the pair master mode device.
4.3.7 UDP Rang Mode
When the routers and switches and other devices do not support multicast, but also
need to achieve the multicast function, you can make the serial server in UDP rang
mode. In this mode, the serial server through the UDP protocol with the user
specified the same network segment of the host advance serial data transmission, to
Description
Applied to the pair master mode, that is, the listen port of the
pair slave mode device.
Check the "Apply to all port" check box to apply the current
settings to all serial ports.
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
NP Series Serial Server User Manual
33
Advertisement
Table of Contents
