Table of Contents
Advertisement
Log in the Web Configuration Interface
Operation Steps
Login in the web configuration interface as follow:
Step 1 Run the computer browser.
Step 2 Enter the address of the serial server "http://192.168.1.254" in the address bar of the
browser.
Step 3 Click the "Enter" key.
Step 4 Pop up a window as the figure below, enter the user name and password on the login
window.
Note:
The default username and password for the serial server are "admin", which is strictly
case-sensitive when typing.
Default user account has the administrator privileges.
Webserver will provide 3 times opportunities to enter username and password. If user
enters the error information for 3 times, the browser will display "Access denied" to
reject access message. Refresh the page and try again.
Step 5 Click "OK"
Step 6 End.
After login in successfully, user can configure relative parameters and information
according to demands.
Note:
After logging in to the device, you can modify the IP address of the serial server for ease of use.
WEB Overtime Processing
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
NP Series Serial Server User Manual
3
Advertisement
Table of Contents
