User Guide - Xerox B1025 User Manual

Symptom
The output is too light.
Toner smears or the print wipes off.
The output has stains on the back side.
Random spots appear on the output, or the image is
blurry.
Solutions
• To check the toner level, check the control panel,
use the print driver, or access Xerox
CentreWare ® Internet Services. If the toner
cartridge is almost empty, replace it.
• Verify that the toner cartridge is approved for use
in your printer, then replace the toner, as needed.
For best results, use a genuine Xerox
cartridge.
• Ensure that the print-quality mode is not set to
Toner Saver. The Toner Saver setting is useful for
draft-quality output.
• Replace the paper with a recommended size and
type, then confirm that your printer and print
driver settings are correct.
• Verify that the paper is dry and that supported
paper is used. If not, change the paper.
• Change the Paper Type settings in the print driver.
In the print driver, open the Printing Preferences
menu, click the Paper/Output tab, then change
the Paper Type setting.
• If the printer is located in a high-altitude
environment, adjust the altitude setting of the
printer. For details, refer to the System
Administrator Guide at
B1022_B1025docs.
• In the print driver, change the Paper Type
settings. In the print driver, open the Printing
Preferences menu, click the Paper/Output tab,
then change the Paper Type setting. For example,
change Plain to Lightweight Cardstock.
• Verify that the paper is the correct size, type, and
weight. If not, change the paper settings.
• Verify that the printer is plugged into an outlet
that provides the correct voltage and power. If
necessary, review with an electrician the electrical
specification of the printer.
• For details, refer to Electrical
• Ensure that the toner cartridge is installed
correctly.
• Verify that the toner cartridge is approved for use
in the printer, then replace the cartridge, as
needed. For best results, use a genuine Xerox
toner cartridge.
• Use the Heavyweight or Cardstock paper type
setting, or use a paper type with a smoother
surface.
• Ensure that the humidity in the room is within
specifications. For details, refer to
Humidity.
• For details, refer to Selecting a Location for the
Printer.
Xerox ® B1025 Multifunction Printer
Troubleshooting
®
toner
®
www.xerox.com/office/
Specifications.
®
Relative
153

User Guide