User Guide - Xerox B1025 User Manual

Troubleshooting
Probable Causes
The printer has been sitting in a cold room.
The relative humidity of the room is too high.
T T o o n n e e r r C C a a r r t t r r i i d d g g e e S S t t a a t t u u s s M M e e s s s s a a g g e e s s
When a toner cartridge approaches the end of usable life, the control panel displays a toner-low
message. When a toner cartridge is empty, the printer stops and displays a message on the control
panel.
Note: Each new toner cartridge includes installation instructions.
Printer Status Message
Low Toner Status: Ensure that a new Toner Cartridge
is available.
Replace the Toner Cartridge.
D D r r u u m m C C a a r r t t r r i i d d g g e e S S t t a a t t u u s s M M e e s s s s a a g g e e s s
When a drum cartridge approaches the end of usable life, the control panel displays a drum cartridge-
low message. When a drum cartridge is worn, the printer displays an end-of-life message, but the
printer continues to print.
Note: Each new drum cartridge includes installation instructions.
Printer Status Message
Drum cartridge near end of life. Ensure that a new
drum cartridge is available.
Drum cartridge is worn. Replace drum cartridge.
132 Xerox ® B1025 Multifunction Printer

User Guide

Solutions
• Before operating the printer, allow it to acclimate
for several hours.
• Allow the printer to operate for several hours at
room temperature.
• Reduce the humidity in the room.
• Move the printer to a location where the
temperature and relative humidity are within the
operating specifications. For details, refer to
Relative Humidity.
Cause and Solution
The toner cartridge is low. Order a new toner
cartridge.
The toner cartridge is empty. Open the front cover,
then replace the toner cartridge.
Cause and Solution
The drum cartridge is nearing end of life. Order a new
drum cartridge.
The drum cartridge requires replacement. Open the
front cover and side cover, then replace the drum
cartridge.