Ipv6 Status - Tenda N300 Wi-Fi xPON ONT User Manual

3.2

IPv6 status

On this page, you can view the IPv6 connection status of the ONT.
To access the page, log in to the web UI of the ONT and choose Status > IPv6.
Parameter description
Parameter
IPv6 Address
LAN
IPv6 Link-
Configuration
Local Address
Prefix Delegation Prefix
Interface
VLAN ID
Connection
Type
Protocol
WAN
Configuration
IP Address
Gateway
Status
Description
It specifies the LAN IPv6 address of the ONT.
It specifies the IPv6 link-local address of the ONT.
A link-local address is an IPv6 unicast address that is automatically
configured on any interface and is valid only for communications within
the network segment.
It specifies the IPv6 prefix of the LAN port of ONT.
It specifies the name of the interface/WAN when IPv6 is enabled.
It specifies the VLAN ID of the WAN connection.
It specifies the WAN connection type.
It specifies the channel mode used by the WAN port.
They specify the IP address and gateway address that the ONT obtains
after you set up a WAN connection successfully.
It specifies the connection status of the WAN connection.
up: The WAN connection is successful and currently available.
⚫
down: The WAN connection failed and is currently unavailable.
⚫
10
Status