Mac Filtering - Tenda V300 User Manual

Step 7 Destination IP address [/prefix length]: Specify the internal network IP address [/prefix length] to be
accessed by the specified PCs from external network.
Step 8 Destination Port (port or port:port): Specify a port number or a range of ports used by PCs from
external network to access your internal network.
Step 9 Click Apply/Save.
--End
4.7.3

MAC Filtering

The MAC filtering is effective only when you create a Bridging WAN service. There are two policies of the
function:
FORWARDED indicates that all MAC layer frames will be FORWARDED except those matching with any of the
specified rules in the following table.
BLOCKED indicates that all MAC layer frames will be BLOCKED except those matching with any of the specified
rules in the following table.
Choose Advanced> Advanced Setup > Security > MAC Filtering to enter the configuration page.
To add a FORWARDED rule, perform the following procedure:
Step 1 Click Add.
Step 2 Protocol Type: Select a protocol type from the drop-down list.
Step 3 Destination MAC Address: Enter the destination MAC address apply the MAC filtering rule to which
you wish to apply the MAC filtering rule.
Step 4 Source MAC Address: Enter the source MAC address to which you wish to apply the MAC filtering rule.
Step 5 Frame Direction: Select a frame direction from the drop-down list.
Step 6 WAN Interfaces: Select a WAN interface from the drop-down list.
Step 7 Click Save/Apply.
61