Accessing Pushbuttons - Baker Hughes Masoneilan SVI II ESD Quick Start Manual

Accessing Pushbuttons

The local pushbuttons are located behind a hinged cover, directly below the display window. To
open the cover loosen the screw and swing the cover down. Always re-fasten the cover after use
to protect the pushbuttons from environmental contamination.
The three pushbuttons perform the following functions:
NOTE
© 2018 Baker Hughes, a GE company, LLC. All rights reserved.
Left Button - Marked
parameter option currently displayed.
Middle Button - Marked
structure to the previous item in the menu or decrement the value currently
shown in the digital display. When used to decrease a displayed value,
holding the button down causes the value to decrease at a faster rate.
Right Button - Marked
structure to the next item in the menu, or to increment the value currently
shown in the digital display. When used to increase a displayed value,
holding this button down causes the value to increase at a faster rate.
When an exclamation point (!) appears in the SVI II ESD display
window, it indicates instrument status available.
Figure 19 SVI II ESD Display Pushbuttons
*
, permits you to select or accept the value or
–
, permits you to move back through the menu
+
, permits you to move forward through the menu
*
(Select)
-
(Back)
Masoneilan SVI II ESD Quick Start Guide =| 57
+
(Forward)