Checking Actuator, Linkages, Or Rotary Adapter - Baker Hughes Masoneilan SVI II ESD Quick Start Manual

Sil3 emergency shutdown device & pst controller

Table of Contents

7. The Raw Position Sensor value measured must in accordance with Table 2 on

page 27.

ValVue ESD Connected Devices Screen

Checking Actuator, Linkages, or Rotary Adapter

Verify that the mounting has not been damaged in shipment for a pre-mounted SVI II ESD, phys-

ically inspect the actuator, linkage. Record the following information for the configuration check-

out:

NOTE

Verify Mounting and Linkage Adjustment

Inspect the mounting and make any needed adjustments before running the PST Controller and

checking the digital configuration.

34 | =BHGE

Figure 10 ValVue ESD for Checking Magnet Position

Valve Air to Open (ATO) or Air to Close (ATC)

Actuator pressure rating

Actuator bench range

Inherent trim characteristic of the control valve; linear, equal percentage, or

other.

For the aforementioned information, refer to the valve data sheet

or model number of control valve.

ValVue ESD Check Screen

Table of Contents

Table of Contents

Masoneilan svi ii esd sil3