Powering Up The Svi Ii Esd - Baker Hughes Masoneilan SVI II ESD Quick Start Manual

Powering Up the SVI II ESD

Verify the wiring and connections and then connect the current source.
Connecting a Power Source
Depending upon the configuration of the SVI II ESD, powering up the unit consists of connecting
to the 4-20 mA current source or the 24 VDC power source.
WARNING
NOTE
44 | =BHGE
This process can cause the valve to move. Before proceeding
ensure the valve is isolated from the process. Keep hands clear
from moving parts.
When an SVI II ESD is turned on it is advisable to apply the air
supply before applying the electrical input signal.
© 2018 Baker Hughes, a GE company, LLC. All rights reserved.