Emerson Micro Motion 9739 MVD Configuration And Use Manual page 164

Transmitter operation
8.4.1 View or acknowledge status alarms with the display
All active Fault or Information alarms are listed in the display alarm menu. The transmitter automatically
filters out Ignore alarms.
Prerequisites
Operator access to the alarm menu must be enabled (default setting). If operator access to the alarm
menu is disabled, you must use ProLink II or the Field Communicator to view or acknowledge status
alarms.
Procedure
To view or acknowledge status alarms, follow the procedure in Figure 8-2.
158 Micro Motion 9739 MVD Transmitters