Configure The Concentration Measurement Application - Emerson Micro Motion 9739 MVD Configuration And Use Manual

Table 5-11 API reference tables, associated process fluids, and associated calculation values
Table name Process fluid
23A Generalized crude
and JP4
23B Generalized
products
23D Lubricating oils
24C Liquids with a
constant density
base or known
thermal expansion
coefficient
53A Generalized crude
and JP4
53B Generalized
products
53D Lubricating oils
54C Liquids with a
constant density
base or known
thermal expansion
coefficient
5.10

Configure the concentration measurement application

Display Not available
ProLink II ProLink→Configuration→CM Setup
Field Communicator Configure→Manual Setup→Measurements→Concentration Measurement
The concentration measurement parameters control how the transmitter calculates concentration
from temperature and density data.
Configuration and Use Manual
Reference
CTL source data temperature
Observed density 60 °F (non-
and observed configurable)
temperature
Observed density 60 °F (non-
and observed configurable)
temperature
Observed density 60 °F (non-
and observed configurable)
temperature
User-supplied 60 °F (non-
reference density (or
configurable)
thermal expansion
coefficient)
and observed
temperature
Observed density 15 °C (configurable)
and observed
temperature
Observed density 15 °C (configurable)
and observed
temperature
Observed density 15 °C (configurable)
and observed
temperature
User-supplied 15 °C (configurable)
reference density (or
thermal expansion
coefficient)
and observed
temperature
Configure process measurement
continued
Density unit
Relative density
Range: 0.6110 to
1.0760
Relative density
Range: 0.6535 to
1.0760
Relative density
Range: 8520 to
1.1640
Relative density
Base density
Range: 610 to 1075
kg/m 3
Base density
Range: 653 to 1075
kg/m 3
Base density
Range: 825 to 1164
kg/m 3
Base density in kg/m 3
93