Physical Contact - Hammond XK-5 Owner's Manual

Set the center value by #6, how vary with press by press by #7.
Th e setting range is 0(short) to 127(long). Th e longer value makes harsh contact.
❽ RELEASE RATE - CENTER (CT)
❾ RELEASE RATE - VARIATION (CT)
Sets the time when the note is off to until virtual contact is released completely.
Set the center value by #8, how vary with press by press by #9.
Th e setting range is 0(short) to 127(long).
NOTE: Attack and Release of the virtual contact has bouncing/chattering.

PHYSICAL CONTACT

❿ PHYSICAL CONTACT - NUMBER (CT)
Th is is for selecting at which physical contact number to sound the selected Virtual Con-
tact on the keyboard of the XK-5 or XLK-5.
Th e setting value is 1--3. Th e larger the value is, the key sounds at the deeper point.
⓫ PHYSICAL CONTACT - DELAY (CT)
Th is is for setting how the Virtual Contact delays after the physical contact is made.
Th e setting value is 0 -- 127. Th e larger the value is, the longer time it takes.
NOTE: After editing, you must record your
changes to save them (Procedure
following).
93