Hammond XK-5 Owner's Manual page 106

106
AMP / EFF (Pre-Amplifi er / Multi-Eff ects) - continued
Phaser
Th is eff ect adds a twisting character to the sound by shifting phase.
❻
❼ PHASER - RATE
Adjusts the frequency speed.
Th e setting range is 0 to 127. Th e cycle becomes faster as the value increases.
❽ PHASER - DEPTH
Adjusts the depth of modulation.
Th e setting range is 0 to 127. Th e modulation becomes deeper as the value increases.
❾ PHASER - RESONANCE
Adjusts the resonance (feed-back) amount.
Th e setting range is 0 to 127. Th e resonance becomes greater as the value increases.
At higher values, the sound is modulated beyond normal recognition.
❿ PHASER - MANUAL
Sets the middle frequency of the phase eff ect.
Th e setting range is 0 to 127. Th e frequency becomes higher as the value increases.
⓫ PHASER - MIX
Adjusts the volume balance between the "dry" and the eff ect sound.
Th e setting range is 0 to 127. At 0, only "dry" is heard. Th e eff ect level becomes great-
er as the value increases. At 127 the ratio between the "dry" and the eff ect sounds
becomes 1:1.
⓬ PHASER - HPF
Controls the frequency range of the eff ect.
Th e setting range is 0 to 127. At 0 the eff ect is added to all frequencies. Th e eff ect is
added to the higher frequencies as the value increases.
Owner's Manual
❼ ❽ ❾ ❿ ⓫ ⓬
Level
Depth
Modulation
HPF
effect range
Rate
Mix
Manual
Frequency