Load The Setup; How To Read The Display - Hammond XK-5 Owner's Manual

138
Load the Setup from USB Flash Drive or Internal Memory into user area.
To locate this mode:
MENU/EXIT

HOW TO READ THE DISPLAY

This indicates there is another
SETUP fi le above (or below).

LOAD THE SETUP

If you do this operation, the settings in this keyboard are
replaced with the newly loaded setups. You should save
important data beforehand (P. 136).
1
When you recall the Setups from the USB Memory, check that
the USB Flash Drive is correctly inserted.
If not inserted, the Setups are recalled from the Internal Mem-
ory.
2
VALUE
ENTER
MASTER
VOLUME
DRAWBAR MENU/EXIT
CONTROL
PLAY
When you locate the LOAD mode, you are fi rst asked where
you wan to load the fi le.
Select the USB Flash or the INTERNAL MEM with the [VAL-
UE] knob and decide with the [ENTER] button.
NOTE: If the USB Flash Drive is not inserted, this step does not ap-
pear.
Owner's Manual
LOAD THE SETUP
SETUP Name
What your are going to operate
UPPER PEDAL LOWER
BANK KEY PATCH
VIBRATO
UPPER LOWER
C-2
V-2
C C D D E F F
This indicates there is another
page on the right (or on the left).
3
VALUE
ENTER
MASTER
VOLUME
DRAWBAR MENU/EXIT
CONTROL
PLAY
Choose the Setup fi le to recall using [▼]/[ ] buttons or [VAL-
UE] knob.
4
VALUE
V-3
ENTER
MASTER
C-1 VOLUME
DRAWBAR MENU/EXIT
G
CONTROL PLAY
When you want to recall all the contents of a Setup File, go to
Step 7.
To recall a specifi c item in the Setup File, touch the [ ] button
and locate the TYPE page.
ENTER
Type of File
SET: SETup
UPPER PEDAL LOWER
BANK KEY PATCH
VIBRATO
UPPER LOWER
C-2
V-2
C C D D E F F
UPPER PEDAL LOWER
BANK KEY PATCH
VIBRATO
UPPER LOWER
C-2
V-2
C C D D E F F
V-3
C-1
G
V-3
C-1
G