Vib&Cho (Vibrato & Chorus) - Hammond XK-5 Owner's Manual

In this mode, the settings specifi c to Vibrato & Choru s are adjusted.
To locate this mode:
MENU/EXIT
or, keep pressing either of the [ON UPPER], [ON LOWER] buttons for a few seconds.
See "Function mode" (P. 68) for operation details.
❶ TYPE
Selects the type of the virtual vibrato equipment.
Metal: Metal Box
Big:
Big Silver Box
Small: Small Silver Box
❷ SPEED
Sets the Speed of the Vibrato and Chorus eff ect.
Th e setting range is 349 - 475 rpm.
❸ MIX
Sets Mix balance of the Chorus eff ect (C1 / C2 / C3).
Th e setting range is D64 (only the Direct tone, no vibrato tone) - EVEN - 63V (only the
Vibrato tone, no direct tone).
❹ PEDAL
Sets Vibrato and Chorus on the Pedal part by [LOWER] button.
Th e setting range is ON/OFF.
VIB&CHO (Vibrato & Chorus)
❸ ❹
❶ ❷
PEDAL
On the B-3/C-3, the Vibrato and Chorus af-
fects not only Lower part but also the Pedal
part via [LOWER] (on the B-3/C-3, "GREAT")
tablet by the circuit structure. It is divided on
later models.
This parameter simulates that.
NOTE: All the parameters in these pages
are Patch Parameters. They are re-
corded into the Patch.
85