Record The Custom Cabinet - Hammond XK-5 Owner's Manual

88
LESLIE - continued
3ch: This is for connecting a 3 channel Leslie cabinet such as the #2101/#2101mk2, 3300/3300W
(with stationary speakers). The Drawbar and the percussion sounds are output from the rotary
channel, the Pipe voices and bypassed Drawbar and percussion sounds are from the station-
ary channel of the Left (or Main) and Right (or Aux, Sub, Animation).
NOTE: This is a system parameter. It is recorded upon setting, and is common with all patches.

RECORD THE CUSTOM CABINET

Record the Leslie parameter (
1
Enter a name to the cabinet as desired.
2
PRESET SELECTOR
UPPER LOWER RECORD
PEDAL PEDAL TO
SPLIT BANK
SUSTAIN LOWER
OCTAVE
TRANSPOSE DOWN UP LOWER
LESLIE
STOP FAST
BYPASS
Press the [RECORD] button in the Leslie parameter pages (#2
to #27).
Th e Custom Cabinet number Select mode is displayed.
Owner's Manual
❷
to on the previous page) to the Custom Cabinet numbers and use them selecting at the Patches.
3
VALUE
UPPER
BANK KEY
ENTER
MASTER
VOLUME
DRAWBAR MENU/EXIT
CONTROL PLAY
C C
Select the Custom Cabinet number to record with the [VAL-
UE] knob.
4
VALUE
UPPER
BANK KEY
ENTER
MASTER
VOLUME
DRAWBAR MENU/EXIT
CONTROL PLAY
C C
Press [ENTER] to record the Custom Cabinet.
Th e display is as the above during the treatment.
NOTE: If you don't wish to record, touch the [MENU/EXIT] button.
PEDAL LOWER
PATCH
VIBRATO
V-3
UPPER LOWER
C-2 C-3
V-2 V-1
C-1
D D E F F G G
PEDAL LOWER
PATCH
VIBRATO
V-3
UPPER LOWER
C-2 C-3
V-2 V-1
C-1
D D E F F G G