Keyboards (Using Midi Keyboards) - Hammond XK-5 Owner's Manual

3 KEYBOARDS (USING MIDI KEYBOARDS)

USB
TO TO
FLASH DRIVE HOST
1. Hook-up as illustrated above.
NOTE: This illustration shows only the keyboard expansion See P. 16 for the basic hook up of the
power source, audio, etc.
2. Switch on this keyboard, and recall the MIDI TEMPLATE "2or3 KBD" (P. 128 #1).
Connected MIDI keyboards wo rks as Lower and Pedal parts. If you wish to use the
MIDI keyboard as Upper and Th is keyboard as Lower, set the MIDI IN mode at "UP-
PER" (P. 128 #2).
Refer to the operation manual of the MIDI keyboards, as required.
RECOMMENDABLE MIDI KEYBOARD
Th e following HAMMOND MIDI pedalboards (compliant with the XK-5) are avail-
able from our sales dealers:
MIDI pedalboard XPK-100 (13 keys)
MIDI pedalboard XPK-200 (20 keys), XPK-200L (20 long keys)
MIDI
FOOT CONTROLLER
OUT IN 1 IN 2 EXP.
PEDAL
CTRL 1
NORM.
PEDAL LOWER EXP-100F
/OTHER ONLY
EXP
MIDI OUT
EXP
LINE OUT
CTRL 2 R L / MONO
REV. NORM. REV.
POLARITY POLARITY
UPPER
BANK KEY
MIDI Keyboard
MIDI OUT
Use Expression cable on
XLK-3, PK-25PXK,
XLK-B3, and XPK-3.
MIDI Pedalboard
LESLIE 11 PIN
PEDAL LOWER
PATCH
HOW WORKS OF MIDI KEY-
BOARD?
If a MIDI template which except "Basic" such as
"2or3 KBD" has recalled, connected MIDI key-
board works as "local" keyboard of this system.
All the performance sent from MIDI OUT of this
keyboard.
21