In this function mode, sets and shows the system parameters.
MENU/EXIT
❿
❸
❹
❷
❶
POWER
❶ POWER - AUTO OFF
Sets whether power off after a certain time is elapsed since last
operated.
30min Powers off if the time is elapsed 30 minutes since last played/
operated.
NO
Disable auto off .
USB
❷ MASS STORAGE
Sets function of the USB TO HOST jack.
OFF
To send/Receive the MIDI and audio stream.
ON
To access the internal memory.
PERIPHERAL DEVICE
❸ IS ACTIVE - XLK
Shows whether is XLK-5 active over KEYBOARD jack.
❹ IS ACTIVE - XPK
Shows whether is XPK-250 active over KEYBOARD jack.
❺ IS ACTIVE - AUDIO
Shows the status of the LINE OUT jacks.
ST
The LINE OUT hooked up both L and R jacks, or not used. The
audio outputs in stereo.
MONO
The LINE OUT hooked up only L/MONO jack. The audio outputs
in mono.
❻ IS ACTIVE - LESLIE
Shows whether is Leslie speaker system active over LESLIE 11
pin jack.
Th e audio outputs LINE OUT jacks when the Leslie speaker
SYSTEM
See "Function mode" (P. 68) for operation details.
❺
❻
❼
❽
system is active, Leslie channel is at single, besides [BYPASS]
button is "On".
❼ IS ACTIVE - FOOT CONTROLLER 1
❽ IS ACTIVE - FOOT CONTROLLER 2
Shows whether is FOOT CONTROLLER 1/2 jack in use.
❾ IS ACTIVE - EXP-100
Shows whether is EXP. PEDAL jack in use.
NOTE: This detects the current for lamp in the Expression Pedal. It
does not detect the other devices using this jack (e.g. XLK-3).
SOFTWARE VERSION
❿ VERSION - MAIN PROGRAM
7 VERSION - SUB PROGRAM
8 VERSION - GENERATOR INFORMATION
9 VERSION - D. S. P. PROGRAM
10 VERSION - BOOT STRAP PROGRAM
11 VERSION - FACTORY PRESETS
12 VERSION - CONTROL PANEL
Th ese are display only and not intended for System update use.
113
ENTER
❾