Hammond XK-5 Owner's Manual page 103

T remolo
Th e tremolo modulates the amplitude at cyclically.
❻
❼ TREMOLO - WAVEFORM
Sets which waveform is used to modulate the volume.
Tri: Triangle wave. The volume changes smoothly.
Sqr: Square wave. The volume suddenly rises and falls.
Saw: Sawtooth wave. Repeated decaying sound is obtained.
S&H: Sample & hold. The volume changes randomly.
DSqr: Dull square wave like the old electric piano eff ect.
❽ TREMOLO - RATE
Adjusts the speed of the tremolo cycle.
Th e setting range is 0 to 127. Th e higher the value, the faster the cycle.
❾ TREMOLO - DEPTH
Adjusts the depth of the tremolo eff ect.
Th e setting range is 0 to 127. At 0 the volume does not modulate. Th e higher the value,
the deeper the eff ect. At 127 a repeated no sound/maximum volume is obtained.
Auto Pan
Auto Pan applies adjustable modulation to the stereo fi eld.
Th is is not applicable if a monophonic (one channel) amp is used, or when the Leslie
eff ect / Leslie speaker is used.
❻
❼ AUTO PAN - WAVEFORM
Sets which waveform to modulate the direction.
Tri:
Triangle wave. The direction smoothly changes.
Sqr:
Square wave. The direction suddenly moves to the left, and suddenly moves to the right.
Saw: Sawtooth waveform. The direction repeatedly moves from left to right.
S&H: Sample & hold. The direction changes randomly.
DSqr: Dull square wave like the old electric piano eff ect (recommended).
❽ AUTO PAN - RATE
Adjusts the speed of the modulation.
Th e setting range is 0 to 127. Th e higher the value, the faster the modulation.
❾ AUTO PAN DEPTH
Adjusts the depth of the cycle.
Th e setting range is 0 to 127. At 0, there is no direction modulation. Th e higher the
value, the deeper the eff ect becomes. At 127 you can give a perfect left/right repetition.
❼ ❽ ❾
❼ ❽ ❾
Level
Depth
Rate
Left Right
Rate
Depth
NOTE: All the parameters in these pages
are Patch Parameters. They are re-
corded into the Patch.
103
Time