Using An External Sequencer; Recording A Organ Performance To An Sequencer/Daw; Sequencer Playback - Hammond XK-5 Owner's Manual

120

USING AN EXTERNAL SEQUENCER

Th is is to record/playback the performance by connecting an external sequencer or
computer with DAW to this keyboard.

Recording a organ performance to an Sequencer/DAW

FLASH DRIVE
USB IN OUT
- MIDI -
MIDI Interface

Sequencer playback

FLASH DRIVE
USB IN OUT
- MIDI -
MIDI Interface
Owner's Manual
USB MIDI
OUT IN 1 IN 2 EXP.
PEDAL
TO TO
HOST
PEDAL LOWER EXP-100F
/OTHER ONLY
MIDI OUT
MIDI OUT
USB MIDI
OUT IN 1 IN 2 EXP.
PEDAL
TO TO
HOST
PEDAL LOWER EXP-100F
/OTHER ONLY
MIDI OUT
MIDI OUT IN
It requires re-hook up by record/playback if the
FOOT CONTROLLER LINE OUT
MIDI cables used Pedal and Lower keyboards
CTRL 1 CTRL 2 R L / M
and a sequencer. Because the number of MIDI
NORM. REV. NORM. REV.
POLARITY POLARITY jacks more than equipped on this keyboard.
1. Hook up as left fi gure.
Set the MIDI template
in accoding to your
2. Recall the MIDI template except of "Use
system.
MIDI Keyboard
It cannot recording the performance what in-
cluding the controlling the External Zones.
Optional
3. Set the MIDI channels of the sequencer /
Record the channel 1 when you play only the
Upper. To record all the parts, record the channel
MIDI Pedalboard
1 to 3 for Upper Lower and Pedal (in default).
4. Start recording of the sequencer/DAW.
5. Send the memory dump if necessary.
6. Start your performance.
FOOT CONTROLLER LINE OUT
1. Hook up as left fi gure.
CTRL 1 CTRL 2 R L / MO
2. Recall the MIDI template at "Basic" (P. 128).
NORM. REV. NORM. REV.
POLARITY POLARITY
3. Start playback of the sequencer/DAW.
Set the MIDI template
at "Basic"
MIDI Keyboard
Optional
MIDI Pedalboard
Ex." - Which according to your environment
"Basic", "Two Manual", "Pedal keyboard", or
"3KBD" (P. 128).
DAW.