Menu And The Contents - Hammond XK-5 Owner's Manual

MENU AND THE CONTENTS

PAGE A
1. DRAWBAR
Sets the parameters for the Drawbars of each part. (P. 74)
2. TUNE
Set the tuning and transpose of the entire keyboard. (P. 83)
3. PATCH
Patch naming, Parameter Load and assignment of Favorites.
(P. 76)
4. CONTROL
For adjusting the controllers, such as the Expression Pedal and
Foot Switch. (P. 78)
PAGE B
1. CUST. TW
For custom setting of the Tone Wheel sets. (P. 89)
2. CONTACT
For custom setting of the virtual multi contacts. (P. 92)
3. PERCUSS
For custom setting the percussion parameters. (P. 84)
4. PED. REG
For custom setting the Pedal registration. (P. 96)
PAGE C
1. AMP/EFF
Adjusts the pre-amplifi er and the Multi-Eff ects here. (P. 102)
2. VIB & CHO
Adjusts the characteristics of the Vibrato & Chorus. (P. 85)
3. LESLIE
For custom setting of the on-board Leslie eff ect and sets the
external Leslie speaker settings. (P. 86)
(4. PIPE)
For custom setting the characteristics of the Pipe stops. (P. 98)
PAGE D
1. EQUALIZ
Adjusts the Patch Equalizer and Master Equalizer. (P. 110)
2. REVERB
Adjusts the Reverb parameters. (P. 111)
3. ZONES
For setting the Internal Zone and External Zones. (P. 126)
2. MIDI
For setting the basic MIDI operations. (P. 128)
PAGE E
1. SAVE
Saving the set-up to a USB Flash drive or Internal Memory.
(P. 136)
2. LOAD
Loading the set-up from a USB Flash drive or Internal Mem-
ory. (P. 138)
3. DELETE
For delete a set-up fi le (P. 140)
4. FORMAT
For initializing the USB Flash drive. (P. 133)
PAGE F
1. DEFAULT
For returning to the various factory default settings. (P. 112)
2. SYSTEM
For setting the System Parameters and displaying the System
information. (P. 113)
3. UPDATE
Updates the system software. (P. 142)
67