Condition; Physical Contact - Hammond A-3 Playing Manual

104
u CONDITION
❻ ATTACK TIME - CENTER (CT)
❼ ATTACK TIME - VARIATION (CT)
This allows you to set the time when the note is on until complete contact is made.
❻
Set the Center value with , the Variation with
The setting range is 0 (short) to 127 (long). A longer value produces a more pronouned
contact.
❽ RELEASE RATE - CENTER (CT)
❾ RELEASE RATE - VARIATION (CT)
This allows you to set the time when the note is off until the Virtual Contact is released
completely.
❽
Set the Center value by , the Variation with
The setting range is 0 (short) to 127 (long).
u PHYSICAL CONTACT
❿ PHYSICAL CONTACT - NUMBER (CT)
This allows you to select which physical contact to use for sounding the selected Virtual
Contact on the keyboard of the XK-5 or XLK-5.
The setting value is 1--3. Physical contact 1 will sound first, then 2 then 3.
NOTE: The Hammond pedal claviers such as the XPK-250 have only one physical contact;
therefore, this value does not apply to the Pedal tones..
⓫ PHYSICAL CONTACT - DELAY (CT)
This allows you to select the time delay between when physical contact is made and the
sounding of the note.
The setting value is 0 -- 800 ms. The larger the value, the longer the delay.
HA<O> XK-5 Owner's Playing Guide
❼
.
❾
.
RELEASE KEY CLICK
Because of the construction of the contacts on
a tone-wheel organ, the Attack Key Click may
be slightly more prominent than the Release
Key Click. The figure below shows this.