Keyboard Channel; System Exclusive Message - Hammond XK-5 Owner's Manual

❿ EXTERNAL ZONES - CONTROL CHANGE
Th is switches the transmission of the Volume and Pan for Ex-
ternal Zones.
Other parameters are set at ZONES function mode such as
Note, Expression and Damper.

KEYBOARD CHANNEL

Sets the MIDI channel to transmit at each part. Th e setting
range is 1 to 16 and OF. At OF there is no transmission.
⓫ TX UPPER
Sets the MIDI channel for sending the UPPER part playing
information, the control information, and that of the Leslie
speaker.
⓬ TX LOWER
Sets the MIDI channel for sending the LOWER part playing
information.
⓭ TX PEDAL
Sets the MIDI channel for sending the PEDAL part playing
information.
⓮ RX UPPER
Sets the MIDI channel for receiving the UPPER part playing
information, the control information, and that of the Leslie
speaker.
⓯ RX LOWER
Sets the MIDI channel for receiving the LOWER part playing
information.
⓰ RX PEDAL
Sets the MIDI channel for receiving the PEDAL part playing
information.
⓱ TX MULTI CONTACT
⓲ RX MULTI CONTACT
Th ese sets whether sending/receiving the playing information
of the multi-contacts.
When ON, each contact information are transmitted by below
list regardless of above MIDI channels #11 to #16.
Physical Contact MIDI Channel
UPPER, First 1
UPPER, Second 2
UPPER, Th ird 3
LOWER, First 4
LOWER, Second 5
LOWER, Th ird 6
PEDAL, First 7
PEDAL, Second 8
PEDAL, Th ird 9
To avoid confusion of MIDI signals, set each MIDI channel
including the external zones (P. 126) to diff erent numbers.

SYSTEM EXCLUSIVE MESSAGE

⓳ DEVICE ID
Th is sets the Device ID when transmitting the system exclusive
messages such as the Memory Dump (#21, 22). Th e receiving
is neglected, when the Device ID does not match, even if the
messages for the same model.
❿ RECEIVE DUMP
Th is switches reception of Memory Dump ON/OFF.
On this keyboard the total onboard memory can be transmit-
ted as a Memory Dump, as system exclusive messages. To pre-
vent reception of Memory Dump, select OFF.
⓫ TEMPORARY DUMP
Sends the Memory Dump.
When you press the [ENTER] button in this mode, the present
settings (see tips) are sent as a whole from the MIDI OUT and
USB TO HOST jack.
Recording a Temporary dump before you record a performance
to an external sequencer, avoids setting mismatching upon se-
quencer playback.
⓬ ALL DUMP
Sends the Full Memory Dump.
Pressing the [ENTER] button in this mode, transmits all the
settings through the MIDI OUT and USB TO HOST jack.
NOTE: The settings in this mode are not recorded to the Patches.
They are recorded upon setting, and are common at all Patch-
es.
The Patch parameters, Global parameters and
System parameters of the Temporary (= the
present setting values) are transmitted.
The contents of each Patch or that of the Leslie
Cabinet are not transmitted. Use 'All Dump' for
saving them.
All the setting values of this keyboard are trans-
mitted by 'All Dump' .
129
TEMPORARY DUMP CONTENTS
TO SAVE ALL