Short Cut To Function Mode; Example Of Operation; Register The Pages You Frequently Use - Hammond XK-5 Owner's Manual

SHORT CUT TO FUNCTION MODE

Each button on the top panel has a built in shortcut-making programming and edit-
ing easier.
Pressing and holding any of the buttons on the top panel automatically jumps the
display to the related function menu item.

EXAMPLE OF OPERATION:

LOCATE THE PERCUSSION FUNCTION MODE
ON SOFT FAST
SECOND
PERCUSSION

REGISTER THE PAGES YOU FREQUENTLY USE

You can assign frequently-used function page to the [ CONTROL] button for im-
mediate access.
EXAMPLE OF OPERATION:
REGISTER THE "DRAWBAR - PEDAL" PAGE
1
2
MASTER
VOLUME
PRESET SELECTOR
UPPER LOWER RECORD
PEDAL PEDAL TO
SPLIT BANK
SUSTAIN LOWER
OCTAVE
TRANSPOSE DOWN UP LOWER
LESLIE
STOP FAST
With holding
BYPASS
THIRD
OVERDRIVE EFFECT REVERB
Hold
VALUE
UPPER PEDAL LOWER
BANK KEY PATCH
ENTER
VIBRATO
UPPER
DRAWBAR MENU/EXIT
CONTROL PLAY
C C D D
Press
If you wish to edit the percussion settings, press and hold ei-
ther of the [ON], [THIRD], [FAST], or [SOFT] buttons, and
the display will immediately jump to the percussion function
mode. Th is is called "SHORT CUT".
In the next chapter, you will see which button is used for a
particular "SHORT CUT".
NOTE: Changing the length of time until display jump when button
is held (P. 81).
Display the page you want to register using the MENU etc.
Here, as an example, let's display the "Drawbar - Pedal" page.
While holding down the [RECORD] button press the [CON-
TROL] button.
Th e display shows "Recording Assign" for a while.
You will be able to immediately access the desired page by
LOWER
pressing the [CONTROL] button.
C-2
V-2
E F F
69