Reverb - Hammond XK-5 Owner's Manual

In this function mode, adjusts the reverb eff ect.
To locate this mode:
MENU/EXIT
❶ DEPTH
Th is sets the depth (volume) of the Reverb Eff ect.
Th e setting range is 0 to 127.
❷ TYPE
Th is sets the types of Reverb eff ect.
Room 1:
Small room
Room 2:
Large room
Live:
Ambient room
Hall 1: Large Hall
Hall 2: Small Hall
Church: Church
Plate: Iron-plate Reverb
Spring:
Spring Reverb
Delay:
Delay
PanDly:
Panning Delay
RevDly: Reverb + Delay
❸ REVERB TIME
When the Type (#2) is set at Room 1 to Spring, Th e decay of the Reverb is attenuated.
Th e setting range is 0 to 127. Th e decay becomes greater as the value is increased.
❹ DELAY TIME
When the Type (#2) is set at Delay, PanDly, RevDly, this parameter sets the delay time.
Th e setting range is 4.7 to 2000ms. Th e delay becomes longer as the number value is
increased.
NOTE: You can set the delay time with the foot switch. (P. 78 #1)
❺ DELAY FEEDBACK
When the Type (#2) is at Delay, PanDly, RevDly, it sets the amount of Feedback (How
many times the sound repeats.)
Th e setting range is 0 to 96%. Th e repetition becomes greater as the value is increased.
NOTE: Type (#2) is a macro-parameter. When you change the type, each reverb parameter (#3 to
#5) is automatically set to the recommend value.
❻ LESLIE ON REVERB
Th is sets the routing of the Reverb eff ect.
OFF: Leslie to Reverb
ON:
Reverb to Leslie

REVERB

Or, holding the [REVERB] button a while.
See "Function mode" (P. 68) for operation details.
To locate this mode:
❻
❸ ❹ ❺
❶ ❷
ENTER
LESLIE ON REVERB
In the past when there are no electronic Les-
lie eff ect, the sound sent to the Leslie speaker
with reverb eff ect. It made a sound which ro-
tated reverb too.
The Leslie On Reverb simulates that.
NOTE: All the parameters in these pages
are Patch Parameters. They are re-
corded into the Patch.
111