Patch; User And Factory; Favorites; Preset Keys - Hammond XK-5 Owner's Manual

60
Th e settings you have prepared can be recorded to User Patches.

USER AND FACTORY

Patches
F99
"VALUE"
F00
in PLAY mode
U99
U09
U08
U07
U06
U05
U04
U03
U02
U01
U00

PATCH

Th e PATCH (on the left side of the illustration) is the basic memory unit on this instru-
ment.
You can record the values of Drawbar Registrations or the eff ects.

FAVORITES

Th e FAVORITES (in the center of the illustration) are the "table" for setting which
Patches to recall/record with the Preset Key.
On the foregoing organs the correspondence of the Preset Key and the internal memory
was fi xed but it is freely assignable on this keyboard.

PRESET KEYS

Th e PRESET KEYS (on the bottom of the illustration) are reversed black and white keys
for recalling the Patches.
Which Preset Key to correspond with which Patch is set with FAVORITES.
Th e PRESET KEYS [A ],[B] (on the right side of the illustration) are special Presets
called "ADJUST PRESET". Th e "last status", operated while the lamp of the key is ON,
is always recorded, and, furthermore, the physical Drawbar Registrations and the inter-
nal registrations always match.
Th is is very helpful for making new Registrations or in the case of the "on the fl y" style
performance, moving Drawbars.
Owner's Manual
PATCH
Bank A
...
Bank D
Bank C
Bank C
Favorite
Table
Preset Keys
Th e PATCHES consist of "User's Patch-
es" from U00 to U99 and "Factory
Patches" from F00 to F99 as shown left
fi gure.
You can overwrite the "User's Patches"
Adjust
by yourselves but not the "Factory
Presets
Patches".
To recall the Patches, select the Patch
number using the [VALUE] knob in
A
the PLAY mode, or use the Preset Key.
To record the current setting to the
B
Patch, fi rst put the name to it and desig-
nate the Patch number to record.
PATCH LOAD
Only the Drawbar Registrations for each key-
board were recorded on the B-3/C-3. To the
Patches on this unit many Parameters are re-
corded in addition to the Drawbar Registra-
tions.
If you want to recall certain specifi c Registra-
tions such as "Drawbar Registrations, but only
UPPER", when you have selected Patches with
the Preset Keys, set the "PATCH LOAD" (P. 76).