Hammond XK-5 Owner's Manual page 109

Delay
Th is is for adding echo eff ects.
❻
❼ DELAY - TYPE
Select the type of delay here.
MONO:
A simply monophonic "echo".
RtoL, LtoR:
The delay is alternated in the stereo fi eld. At RtoL the delayed sound comes from the right, and
at LtoR from the left. Your results may vary when used in a mono hookup, or through a Leslie
Speaker.
❽ DELAY - TIME
Adjusts the delay time.
Th e setting range is 10 to 1000 ms.
❾ DELAY - FEED-BACK
Sets the repetition amount of the eff ect sound.
Th e setting range is 0 to 127. Th e repetition becomes greater as the value is increased.
❿ DELAY - MIX
Adjusts the volume balance between the "dry" and the eff ect sound.
Th e setting range is 0 to 127. At 0, only the "dry" is heard. Th e eff ect level becomes
greater as the value is increased. At 64 the ratio between the "dry" and the eff ect sounds
becomes 1:1. At 127 only the eff ect sound is heard.
❼ ❽ ❾ ❿
Level
TYPE = MONO
Original Signal
Effect Signal
Mix
Delay Time
Level
TYPE = PAN
L R
L R
L R
NOTE: All the parameters in these pages
are Patch Parameters. They are re-
corded into the Patch.
109
Feedback
Time
Time