Save The Setup; How To Read The Display - Hammond XK-5 Owner's Manual

136
In this mode, save the Setup fi le into the USB Flash Drive or Internal Memory.
To locate this mode:
MENU/EXIT

HOW TO READ THE DISPLAY

This indicates there is another
SETUP fi le above (or below).

SAVE THE SETUP

1
TO
FLASH DRIVE
When you save the Set Ups to the USB Flash Drive, make sure
the USB Flash Drive is correctly inserted. If not correctly in-
serted, the Setups are saved to the Internal Memory.
2
VALUE
ENTER
MASTER
VOLUME
DRAWBAR MENU/EXIT
CONTROL PLAY
When you locate the SAVE mode, you are fi rst asked to which
media you want to save the fi le.
Select the USB Flash or INTERNAL MEM with the [VALUE]
knob and decide with the [ENTER] button.
NOTE: If the USB Flash Drive is not inserted, this step does not ap-
pear.
Owner's Manual
SAV E THE SETUP
SETUP Name
What your are going to operate
USB
OUT
TO
HOST
UPPER PEDAL LOWER
BANK KEY PATCH
VIBRATO
UPPER LOWER
C-2
V-2
C C D D E F F
3
SAVE AS NEW FILE
VALUE
ENTER
MASTER
VOLUME
DRAWBAR MENU/EXIT
CONTROL
PLAY
Select the "New Save" by using [ ] button at several times
or [VALUE] knob, press the [ENTER] button to decide.
OVERWRITE RECENT FILE
V-3
C-1
Select the fi le which wish to overwritten by using [ ] button
G
at several times or [VALUE] knob, press the [ENTER] button
to decide.
ENTER
Type of File
SET: SETup
UPPER PEDAL LOWER
BANK KEY PATCH
VIBRATO
UPPER LOWER
C-2
V-2
C C D D E F F
V-3
C-1
G