Patch; Patch Name; Patch Level; Patch Load - Hammond XK-5 Owner's Manual

76
In this mode you a name your Patch, set which parameters load, and how to link to
the Preset Keys.
To locate this mode:
MENU/EXIT
⓯
⓮
❻
❺
❸
❶

PATCH NAME

A Patch has each name for UPPER and LOWER.
❶ UPPER (P), ❸ LOWER (P)
Name the present patch using up to 10 letters.
Move the cursor by the [ ][ ] buttons. Th en select letters with the [VALUE] knob.
❷ COPY FROM LOWER, ❹ COPY FROM UPPER
Copies the Patch name from another part. Press the [ENTER] button at this page to
copy.

PATCH LEVEL

❺ PATCH LEVEL (P)
Adjusts the present Patch volume. It is controlled by MIDI control change #7 "Volume"
also.
Th e setting range is 0 to 127.
NOTE: These parameters 1, 3 and 5 (P) are Patch Parameter. They are recorded in each patch.
They are lost unless you save the patch.

PATCH LOAD

Th ese are for setting which parameters are loaded when a Patch is called. Sets whether
or not to load:
❻ PATCH LOAD - PEDAL TO LOWER (B)
Whether load the parameters of the Pedal part when the Lower Patch is recalled.
❼ PATCH LOAD - REGISTRATION (B)
Drawbar registration.
❽ PATCH LOAD - PARAMETERS (B)
Th e parameters such as organ type or Percussion.
❾ PATCH LOAD - INTERNAL ZONE (B)
Th e parameters which relating with Internal Zone, Pedal to Lower.
❿ PATCH LOAD - EXTERNAL ZONE (B)
Th e parameters specifi c to the External Zone to control external MIDI equipment.
⓫ PATCH LOAD - DRAWBAR EFFECT (B)
Th e parameters which relating with Patch Level, Overdrive, Multi-Eff ects, Equalizer.
Owner's Manual

PATCH

See "Function mode" (P. 68) for operation details.
⓰ ⓱ ⓲
❼ ❽
❹
❷
ENTER
⓳ ⓴
❾ ❿
PATCH NAME PER PARTS
On the Preset Key of the B-3/C-3 memorized
diff erent named registration on the same key
like this;
Swell C : Stopped Flute
Great C : Cello
To simulate that, this keyboard has Patch
names per part.
WHERE IS RECORDED PATCH LEVEL?
The Patch level is recorded into UPPER part of
the Patch.
The current Patch level does not changed if
the LOWER Patch is recalled.
⓫ ⓬ ⓭