Hammond XK-5 Owner's Manual page 105

Ring Mod.
Th e Ring Modulator creates complex, metallic-like sounds by taking the sum and diff er-
ence of the fundamental tone and a second "ring" frequency.
❻
❼ RING MODULATOR - SOURCE
Selects what to use to modulate the ring frequency.
EXP: Modulates the ring frequency with the Expression Pedal.
LFO: Allows a cyclical modulation eff ect using the built-in LFO-Low Frequency Oscillator.
NOTE: The ring frequency changes by the note, i. d. the UPPER Part performance.
❽ RING MODULATOR - FREQUENCY
Adjusts the central ring frequency.
Th e setting range is 0 to 127. Th e frequency becomes higher as the value increases.
❾ RING MODULATOR - MIX
Adjusts the volume balance between the fundamental and eff ect sounds.
Th e setting range is 0 to 127. At 0, only the fundamental sound is heard. As the value is
raised, the more eff ect is added. At 127, only the eff ect comes out.
❿ RING MODULATOR - WAVEFORM
❼
When the SOURCE is set at LFO, the LFO waveform is set.
Tri:
Triangle wave. The ring frequency number smoothly varies.
Sqr:
Square wave. The ring sound suddenly changes to treble and also suddenly to bass.
Saw: Sawtooth wave. The ring sound repeatedly drops from treble to bass.
S&H: Sample & hold wave. The ring frequency changes randomly.
⓫ RING MODULATOR - RATE
❼
When the SOURCE is set at LFO, the frequency speed is adjusted.
Th e setting range is 0 to 127. Th e cycle becomes faster as the value is raised.
⓬ RING MODULATOR - DEPTH
Adjusts the depth of the frequency change when the source is set at LFO or EXP.
Th e setting range is 0 to 127. Th e ring frequency becomes wider as the value is raised.
❼ ❽ ❾ ❿ ⓫ ⓬
Level
Modulation
NOTE: All the parameters in these pages
are Patch Parameters. They are re-
corded into the Patch.
105
Waveform,
Rate
Modulation
Source
Original Signal
Effect Signal
Ring
Frequency
Frequency