Connecting The 1 Channel Leslie Speaker; Basic Connection Of The Leslie Speaker; Using With Stationary Speakers - Hammond XK-5 Owner's Manual

CONNECTING THE 1 CHANNEL LESLIE SPEAKER

ONTROLLER LINE OUT
CTRL 2 R L / MONO
NORM. REV.
POLARITY

BASIC CONNECTION OF THE LESLIE SPEAKER

Connect the Leslie Speaker #981/#3300/#122XB and the Leslie 11-PIN jack on this
keyboard with the exclusive 11-pin Leslie cable (not included).
1. Set the LESLIE - EXT. LESLIE CH at "1" (P. 87).
2. Make the setting of Tone Wheel organ.
3. Switch "OFF" the [BYPASS] button, set the [VOLUME] of the #981/#3300/#122XB
at desired volume.

USING WITH STATIONARY SPEAKERS

You can play as 3-channel type Leslie speaker system to use "dry" sound also with ad-
ditional stationary speakers which connected to the LINE OUT jacks.
Following step 1 to 3 above.
4. Repeat "ON/OFF" the [BYPASS] button with playing the keyboard, set the [VOL-
UME] of the stationary speakers at same volume which you can hear.
LESLIE 11 PIN
BANK KEY
UPPER PEDAL LOWER
PATCH
STATIONARY SPEAKER
The word "Stationary Speaker" means ordinary
no rotating speaker. It is pair of words " Rotary
Speaker".
This keyboard can use genuine stationary
speakers #2121, or some keyboard amplifi ers
which commercially available.
19