Uexternal Leslie Speaker; Record The Cabinet - Hammond Sk1 Manual

86
LESLIE - continued

uEXTERNAL LESLIE SPEAKER

⓴ LESLIE CHANNELS
Sets the channel for the Leslie speaker connected to the LESLIE 8-PIN jack.
1ch:
For connecting a 1 channel Leslie cabinet such as the 122XB, 3300/W (non-expansion).
The Drawbar and the percussion sounds are output only from the rotary channel, the
other voices are from the LINE OUT jack.
3ch:
This is for connecting a 3 channel Leslie cabinet such as the 2101/mk2, 3300/W (stationary
expanded). The Drawbar and the percussion sounds are output from the rotary channel,
the Extra Voices are from the stationary channel of the Main and Aux.
NOTE: This is a system parameter. It is recorded upon setting, and is common with all patch-
es.

RECORD THE CABINET

Record the Leslie Parameter (#2 to #19 on the previous page) to
the Cabinet Numbers and use them selecting at the patches.
1
Give a name to the cabinet as desired.
2
MENU/
EXIT
e Mixture Hautbois
III 8'
PLAY
Press the [RECORD] button in the Leslie Parameter
setting mode (#2 to #19).
e Cabinet Select mode is displayed.
HA<O> Sk1 / Sk2 Owner's Manual
VALUE
UPPER PEDAL LOWER
NUMBER NAME
PATCH
3
MENU/
EXIT
UPPER PEDAL
PLAY
NUMBER NAME
PATCH
Select the Cabinet Number to record with the [VALUE] knob.
4
MENU/
EXIT
UPPER
PEDAL
ENTER
PLAY
NUMBER NAME
PATCH
Recording is made upon pressing the [ENTER].
e display is as the above during the treatment.
NOTE: If you don't wish to record, touch the [MENU/EXIT] button.
VALUE
LOWER
VALUE
LOWER
ENTER
ENTER