Vibrato; Vib&Cho (Vibrato And Chorus) - Hammond B-3 Owner's Manual

82
In this mode, you change the settings of the Vibrato and Chorus.
To locate this mode:
1. Press the [MENU/EXIT] button to display the MENU, select PAGE B by the [PAGE] button,
and then press the [2] VIB&CHO button.
2. Or, move any [VIBRATO] tablet pressing the [MENU/EXIT] button.
1. VIBRATO - RATE
This is for setting the Speed of the Vibrato and Chorus effect.
The setting range is 6.10 - 7.25 Hz.
2. VIBRATO - TREMOLO
This is for setting the Tremolo (amplitude modulation) of the Vibrato and Chorus effect.
The setting range is 0 - 15.
3. VIBRATO - EMPHASIS
This is for setting the Emphasis (high frequency boost) of the Chorus effect (C1/C2/C3).
The setting range is 0 - 9 dB.
4. to 9. VIBRATO - DEPTH V1 to C3
These are for setting the Depth of the each Vibrato and Chorus effect mode.
The setting range is 0 - 15.
10. VIBRATO - TABLET GREAT
This is for setting on which part to put the Vibrato & Chorus effect by the [VIBRATO GREAT] tablet.
GREA GREAT & PED GREA T & PED T & PEDAL T & PED AL AL AL:
GREA GREA T & PED AL
The Vibrato and Chorus effect works on the Great manual and Pedalboard.
GREA GREAT ONL GREA T ONL T ONLY Y Y Y Y : T ONL
GREA GREA T ONL
The Vibrato and Chorus effect works only on the Great manual.
NOTE: The parameteres in these modes are Preset Parameters and are recorded to each Combination Preset.
VIB&CHO (VIBrato and CHOrus)
10
4 5 6
1 2
7 8
3
Owner's Manual
9