External Design Of The Device; Interfaces And Operator Controls For Devices With 24 V Dc Power Supply - Siemens SIMATIC IPC PX-39A Operating Instructions Manual

Product description

1.4 External design of the device

1.4 External design of the device
1.4.1

Interfaces and operator controls for devices with 24 V DC power supply

Device without expansion slot
① Protective conductor
② On/off switch
③ 24 V DC
X80
④ 4 × USB
X60/X61/X62/X63
⑤ 2 x DPP
X70/X71
⑥ 4 × Ethernet
X1 P1/X2 P1/X3
P1/X4 P1
⑦ COM1 X30
⑧ 2 x slot for SSD drive
SSD1 X50/SSD2 X51
⑨ Opening for expansion
interface X101 or
COM2 X31 (optional)
⑩ Opening for expansion
interface X100
Device with expansion slot
Other device variants (Page 49):
• with slot for one PCIe expansion card
You can find more information about expansion cards under "Expansion cards (Page 65)".
14
Connection for protective conductor
You switch on the device with the on/off switch. The on/off switch does not isolate the de-
vice from the power supply.
• Position "ON", when the "_" symbol is pressed.
• Position "OFF" is the delivery state.
Power supply connection
USB 3.2 Gen 2 type A, high current, backward compatible
Connection for monitors with DisplayPort interface
Connections for Ethernet RJ45 for 10/100/1000 Mbps
• Ethernet X1 P1 is iAMT-capable
• Ethernet X2 P1, Ethernet X3 P1 and Ethernet X4 P1
Serial interface 1 (V.24), 9-pin SUB-D socket
SSD drives in NVMe format, installed in SIMATIC IPC Slider
Interfaces of external expansion modules (M.2 format)
Serial interface 2 (V.24), 9-pin SUB-D socket (optional)
Interfaces of external expansion modules (M.2 format)
Operating Instructions, 08/2022, A5E51699601-AA
SIMATIC IPC PX-39A