Technical Specifications Of The Interfaces; Technical Specifications Of The Connections On The Device - Siemens SIMATIC IPC647E Operating Instructions Manual

8.12

Technical specifications of the interfaces

8.12.1

Technical specifications of the connections on the device

See the note in "Applicability of technical specifications (Page 153)".
Note
You can find detailed information on the position of the connections under "Device ports
(Page 22)".
Connec- Description
tion socket
COM1 COM:
COM2
• Serial interface (standard: RS-232)
• Sub-D socket
• V.24
DP DisplayPort (labeling on the device: DPP)
An analog monitor can be used with an adapter cable (optional).
• Connection for monitors with DisplayPort connector
• Connection for monitors with VGA connector via DP-VGA
adapter,
See Hardware accessories (Page 31)
• Connection for monitors with DVI connector via DP-DVI-D
adapter,
See Hardware accessories (Page 31)
DVI-D DVI-D:
• Connection for monitors with DVI-D connector
Monitors with a DVI-D connector can also be connected to the
DPP connection socket using an adapter.
USB Type A USB Type A:
• High-current
USB Type C USB Type C:
• High-current
SIMATIC IPC647E
Operating Instructions, 09/2022, A5E52254141-AA
Technical specifications
8.12 Technical specifications of the interfaces
Assignment
9-pin
(±12 V)
20-pin
(3.3 V; 500 mA)
24-pin
(5 V; 500 mA)
5 V
5 V; 1.5 A; up to 10 Gbps
171