Interfaces At Rear Of The Device - Siemens SIMATIC IPC1047E Operating Instructions Manual

Overview
1.2 Design of the device
1.2.3

Interfaces at rear of the device

①
②
③
④
⑤
⑥
⑦
Connections of the optional graphics cards
After an expansion card, e.g. graphics card, is installed, its connections are available on the
back of the device. The following table shows examples of connections of monitors or VR
glasses:
Connection socket
USB 3.1 Gen 2; Type C
backwards compatible to USB 3.0 / 2.0 / 1.1; each 1500 mA / high current
USB 3.1 Gen 2; Type C
backwards compatible to USB 3.0 / 2.0 / 1.1; each 1500 mA / high current
DisplayPort (labeling on the device: DPP)
Sum of the currents on the USB ports of the device (including the internal USB ports) ≤ 3 A
1
Maximum cable length -= 3 m; depending on the attenuation of the cable and the maximum data
2
rate of the connection.
Use the original connection technology of the I/O devices to be connected without adapters and with-
out extensions.
16
COM interface
RJ45 IPMI dedicated LAN connection
USB 3.0 ports
USB 2.0 ports
Gbit ETHERNET interface 1
Gbit ETHERNET interface 2
VGA connection
2
2
1
1
for connecting monitors to internal
graphics card
Operating Instructions, 03/2021, A5E50259546-AA
SIMATIC IPC1047E