Receiving - YASKAWA PROFIBUS-DP SI-P3 Technical Manual

3

Receiving

After receiving the option package:
1. Make sure that the option is not damaged and no parts are missing. Contact your sales outlet if the option or other parts
appear damaged.
NOTICE: Do not use damaged parts to connect the drive and the option. Failure to comply could damage the drive and option.
2. Confirm that the model number on the option nameplate and the model listed in the purchase order are the same. Refer
to Figure 2 on page 10
Yaskawa representative about any problems with the option.

Contents and Packaging
Description:
-
Quantity:
<1> GA700 and GA800 drives do not use the ground wire.
<2> GA700 and GA800 drives use two screws only.

Installation Tools
• A Phillips screwdriver. Phillips screw sizes vary by drive capacity.
• A flat-blade screwdriver (blade depth: 0.4 mm (0.02 in), width: 2.5 mm (0.1 in)).
• A pair of diagonal cutting pliers.
• A small file or medium-grit sandpaper.
YASKAWA ELECTRIC SIEP C730600 82D YASKAWA AC Drive Option SI-P3 Technical Manual
for details. Contact the distributor where the option was purchased or contact Yaskawa or a
Table 2 Contents of Package
Ground
Option
Wire
<1>
1 1
Screws (M3)
1000-Series
ERR RUN
BF COMM
3 1
<2>
LED Labels
GA500, GA700, and
GA800
1
3 Receiving
Installation Manual
MANUAL
1
9