Beckhoff EL922 Series Documentation page 57

nominal current for output 1. Press once = 1 A, press twice = 2 A, ...., press 10 times = 10 A, press ...
≥11 times = OFF; (in the 4 A variant, press ≥5 times = Off). For output 2, use button LED 2. Press one
of the LED buttons for ≥3 seconds to save your entries. See also chapter LEDs and connection, pro-
gramming with LED buttons [} 41].
4. Commissioning
The EL922x is ready for operation when the green Ready LED lights up after successful nominal cur-
rent setting and initialization.
Checking of the process data (hardware protection) and the Diag messages
Check the process data [} 106] (hardware protection) and the Diag messages [} 151] for warnings
that could indicate a wiring error. Also check the Ready LED and the Button LEDs for flickering. The
terminal must not be operated in such a condition as this could destroy the electronics.
EL922x Version: 1.0
Commissioning
57