Chrysler Concorde 2004 Service Manual page 1113

CLUSTER LAMP FAILURE —
TEST
3 NOTE: The DRBIII communication with the CAB must be operational for
the result of this test to be valid.
Turn the ignition off.
Remove ABS Valve fuse.
Perform the Key-on Bulb Check.
Does the ABS Indicator remain on after the bulb check?
Yes → Test Complete.
No
4 NOTE: The following steps will initiate the Instrument Cluster self test.
Turn the ignition off.
Press and hold the odometer reset button.
Turn the ignition to RUN.
Observe the Instrument Cluster indicators.
Release the odometer reset button.
Did the ABS Indicator illuminate during the Instrument Cluster self test?
Yes → Replace the Controller Antilock Brake in accordance with the
No
Continued
ACTION
→ Replace the Controller Antilock Brake in accordance with the
Service Information.
Perform ABS VERIFICATION TEST - VER 1.
Service Information.
Perform ABS VERIFICATION TEST - VER 1.
→ Replace the Instrument Cluster in accordance with the Service
Information.
Perform ABS VERIFICATION TEST - VER 1.
17
BRAKES (CAB)
APPLICABILITY
All
All