Chrysler Concorde 2004 Service Manual page 1366

2 INTRODUCTION
BODY CODE PLATES (Continued)
Fig. 2 BODY CODE PLATE LOCATION
1 - BODY COPY PLATE
2 - BATTERY TRAY
• EGJ = 3.5 L, Six Cylinder, 24 Valve, SOHC,
High Output, Gasoline, Aluminum Block
• EGC = 3.5 L, Six Cylinder, 24 Valve, SOHC,
Magnum, Gasoline, Aluminum Block
DIGIT 23
Open Space
BODY CODE PLATE – LINE 2
DIGITS 1 THROUGH 12
Vehicle Order Number
DIGITS 13, THROUGH 15
Vinyl Roof Code
DIGITS 16 AND 17
Open space
DIGITS 18 AND 19
Vehicle Shell Line
• LH
DIGITS 20
Carline
• C = Chrysler
• D = Dodge
• Y = Chrysler
DIGIT 21
Price Class
• E = Economy
• H = High Line
• L = Low Line
• M = Mid Line
• P = Premium
• S = Special/Sport
• X = Performance Image
DIGITS 22 AND 23
Body Type
• 41 = Four Door Sedan
BODY CODE PLATE LINE 1
DIGITS 1, 2, AND 3
Transaxle Codes
• DGX = 42LE 4-Speed Electronic Automatic
Transaxle
DIGIT 4
Open Space
DIGIT 5
Market Code
• C = Canada
• B = International
• M = Mexico
• U = United States
DIGIT 6
Open Space
DIGITS 7 THROUGH 23
Vehicle Identification Number
• (Refer to VEHICLE DATA/VEHICLE INFOR-
MATION/VEHICLE IDENTIFICATION NUMBER -
DESCRIPTION) for proper breakdown of VIN code.
IF TWO BODY CODE PLATES ARE REQUIRED
The last code shown on either plate will be fol-
lowed by END. When two plates are required, the
last code space on the first plate will indicate (CTD)
When a second plate is required, the first four
spaces of each line will not be used due to overlap of
the plates.
FASTENER IDENTIFICATION
DESCRIPTION
The SAE bolt strength grades range from grade 2
to grade 8. The higher the grade number, the greater
the bolt strength. Identification is determined by the
line marks on the top of each bolt head. The actual
bolt strength grade corresponds to the number of line
marks plus 2. The most commonly used metric bolt
strength classes are 9.8 and 10.9. The metric
strength class identification number is imprinted on
the head of the bolt. The higher the class number,
the greater the bolt strength. Some metric nuts are
imprinted with a single-digit strength class on the
nut face. Refer to the Fastener Identification and
Fastener Strength Charts (Fig. 3) and (Fig. 4).
LH