Installation - Chrysler Concorde 2004 Service Manual

8L - 46 LAMPS/LIGHTING - EXTERIOR
UNDERHOOD LAMP UNIT - POLICE (Continued)
Fig. 66 UNDERHOOD LAMP UNIT LOCATION -
TYPICAL - POLICE
1 - CONNECTOR
2 - UNDERHOOD LAMP UNIT

INSTALLATION

(1) Position the underhood lamp unit on the hood
inner panel.
(2) Install the push-pin fastener attaching the
lamp unit base to the inner hood panel.
(3) Install the lamp unit and press into place.
(4) Connect the wire harness connector.
(5) Connect the battery negative remote cable or
reinsert fuse Y in the PDC.
(6) Verify system and vehicle operation.
(7) Close hood.
LH