Table of Contents
Advertisement
21 - 152
41TE AUTOMATIC TRANSAXLE
41TE AUTOMATIC TRANSAXLE (Continued)
(49) Install rear sun gear and #7 needle bearing
(Fig. 132).
NOTE: The number seven needle bearing has three
anti-reversal tabs and is common with the number
five and number two position. The orientation
should allow the bearing to seat flat against the
rear sun gear (Fig. 131). A small amount of petrola-
tum can be used to hold the bearing to the rear sun
gear.
Fig. 131 Number 7 Bearing
1 - #7 NEEDLE BEARING
2 - REAR SUN GEAR
Fig. 132 Install Rear Sun Gear and #7 Needle
1 - #7 NEEDLE BEARING
2 - REAR SUN GEAR
Bearing
(50) Install front carrier/rear annulus assembly
and #6 needle bearing (Fig. 133).
Fig. 133 Install Front Carrier and Rear Annulus
Assembly
1 - #6 NEEDLE BEARING
2 - FRONT CARRIER AND REAR ANNULUS ASSEMBLY (TWIST
AND PULL OR PUSH TO REMOVE OR INSTALL).
(51) Install front sun gear assembly and #4 thrust
washer (Fig. 134).
Fig. 134 Install Front Sun Gear Assembly
1 - FRONT SUN GEAR ASSEMBLY
2 - #4 THRUST WASHER (FOUR TABS)
JR
Advertisement
Table of Contents
