21 - 22
T350 MANUAL TRANSAXLE
DIFFERENTIAL (Continued)
(5) Remove pinion shaft (Fig. 57).
Fig. 57 Pinion Shaft Removal
1 - DIFFERENTIAL ASSEMBLY
2 - PINION SHAFT
3 - SPEEDOMETER DRIVE GEAR
4 - PINION SHAFT RETAINING PIN
(6) Remove pinion gears, side gears, and thrust
washers (Fig. 58) (Fig. 59).
ASSEMBLY
(1) Assemble side gears, pinion gears, and thrust
washers (Fig. 59) into case through opening and
rotating into position (Fig. 58).
(2) Install pinion shaft (Fig. 57).
1 - DIFFERENTIAL ASSEMBLY
2 - PINION SHAFT
3 - SPEEDOMETER DRIVE GEAR
4 - SIDE GEAR THRUST WASHERS (SELECT THICKNESS)
Fig. 58 Remove Pinion Gears, Side Gears, and
1 - DIFFERENTIAL ASSEMBLY
2 - PINION SHAFT
3 - SPEEDOMETER DRIVE GEAR
4 - PINION SHAFT RETAINING PIN
5 - PINION GEAR (2)
Fig. 59 Differential Components
5 - PINION GEAR THRUST WASHERS
6 - PINION GEARS
7 - SIDE GEARS
8 - PINION SHAFT RETAINING PIN
Thrust Washers
JR