JR
THROTTLE BODY (Continued)
Fig. 29 THROTTLE CABLE BRACKET
REMOVAL - 2.7L
(1) Disconnect negative cable from battery
(2) Disconnect electrical connectors from throttle
body (Fig. 30).
Fig. 30 TPS AND INLET AIR TEMP. SENSOR 2.7L
1 - Throttle Position Sensor
2 - Inlet Air Temperature Sensor
(3) Disconnect clean air hose from throttle body.
(4) Remove the throttle cable shield (Fig. 31).
Fig. 31 THROTTLE SHIELD 2.7L
(5) Hold throttle lever in wide open position.
Remove throttle cable and speed control cables from
throttle arm (Fig. 32).
Fig. 32 THROTTLE CABLES 2.7L
(6) Remove throttle cable bracket.
FUEL INJECTION
14 - 35