Forward Instrument Panel Console; Headliner - Chrysler Sebring 2004 Service Manual

23 - 84 INTERIOR
FORWARD INSTRUMENT
PANEL CONSOLE
REMOVAL
(1) Remove floor console.
(2) Remove instrument panel cluster hood (Refer
to 23 - BODY/INSTRUMENT PANEL/CLUSTER
BEZEL - REMOVAL).
(3) Remove instrument panel center bezel.
(4) Remove left knee bolster.
(5) Release glove box door catches and allow to
hang downward.
(6) Remove screws holding storage bin to forward
instrument panel console (Fig. 10).
(7) Remove storage bin from forward instrument
panel console.
(8) Remove screws holding forward instrument
console to shifter mounting bracket.
(9) Remove screws attaching forward instrument
panel console to instrument panel at sides of storage
bin area.
(10) Remove screws attaching forward instrument
panel console to instrument panel support braces.
(11) Remove forward instrument panel console
from vehicle.
INSTALLATION
(1) Position forward instrument panel console to
vehicle.
(2) Install screws attaching forward instrument
panel console to instrument panel support braces.
(3) Install screws attaching forward instrument
panel console to instrument panel at sides of storage
bin area.
(4) Install screws attaching forward instrument
panel console to shifter mounting bracket.
(5) Install storage bin from forward instrument
panel console.
(6) Install screws attaching storage bin to forward
instrument panel console.
(7) Release glove box door catches and allow to
hang downward.
(8) Install left knee bolster.
(9) Install instrument panel center bezel.
(10) Install instrument panel cluster hood.
(11) Install floor console.

HEADLINER

REMOVAL
CAUTION: Special Tool 6967 is needed to remove
the rear locating clip attached to the headlining just
forward of the rear window.
Fig. 10 Forward Instrument Panel Console
1 - INSTRUMENT PANEL

2 - FORWARD INSTRUMENT PANEL CONSOLE

3 - PARK BRAKE
4 - GEAR SHIFTER
(1) Remove the door opening weatherstrips. (Refer
to 23 - BODY/WEATHERSTRIP/SEALS/DOOR
OPENING WEATHERSTRIP - REMOVAL)
(2) Remove instrument panel end cap/fuse cover.
(3) Remove the sun visors. (Refer to 23 - BODY/
INTERIOR/SUN VISOR - REMOVAL)
(4) Remove sun visor supports. (Refer to 23 -
BODY/INTERIOR/SUN
REMOVAL)
(5) Remove left A-pillar trim. (Refer to 23 - BODY/
INTERIOR/A-PILLAR TRIM - REMOVAL)
(6) Remove front/rear assist handles and/or coat
hooks.
(7) Remove right and left upper B-pillar trim.
(Refer to 23 - BODY/INTERIOR/UPPER B-PILLAR
TRIM - REMOVAL)
(8) Remove upper quarter trim, as necessary.
(Refer to 23 - BODY/INTERIOR/UPPER QUARTER
TRIM - REMOVAL)
(9) Disconnect headliner electrical connector along
instrument panel bracket.
(10) Disconnect headliner electrical connector from
fuse panel (Fig. 11).
VISOR SUPPORT
JR
-